Pipe & Duct Seals
The ChamberTite range of pipe and duct seals includes both flexible and rigid seals.
Flexible Entry Boots
This part of the range is designed to alleviate the problem of water ingress into containment chambers and sumps and tank and dispenser sumps on petroleum forecourts that have pipework and duct entries. The boot provides a watertight seal to the pipe and to the chamber wall. Tried and test design with more than 100,000 installed worldwide.Simple and easy to install. Minimum leakage paths of any design available.
Rigid Bellmouth Seals
These units are designed to seal rigid and flexible ducts into containment chambers and buildings. The range has been design to minimise the size of the seal enabling the maximum number of ducts to be installed both vertically and horizontally within chambers.
For further detailed product information see in individual product pages for downloads of Case Studies (CS), Drawings (DRG) and Installation Instructions (INS)
Refine Search
-
ChamberTite Entry Boot 3/4" or 25mm CTB-0075
3/4" or 25mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chambers ..Price:
£12.50 -
ChamberTite Entry Boot 1" or 32mm CTB-0100
1" or 32mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chambers an..Price:
£10.00 -
ChamberTite Entry Boot 1 1/2" or 50mm c/w 3/4", 1" and 1 1/4" adapters CTB-3150
1 1/2" or 50mm ChamberTite Entry Boot and reducer donuts for sealing pipe, cables and ducts into ..Price:
£12.50 -
ChamberTite Entry Boot 1 1/2" or 50mm CTB-0150
1 1/2" or 50mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Ch..Price:
£12.50 -
ChamberTite Double Entry Boot 1 1/2" or 50mm DSB-3838
1 1/2" or 50mm ChamberTite Flexible Entry Boot for sealing pipe, cables and ducts into Cont..Price:
TBA -
ChamberTite Double Entry Boot 2" or 63mm DSB-5050
2" or 63mm ChamberTite Flexible Entry Boot for sealing pipe, cables and ducts into Containment Ch..Price:
TBA -
ChamberTite Entry Boot 2" or 63mm CTB-0200
2" or 63mm ChamberTite Flexible Entry Boot for sealing pipe, cables and ducts into Containment Ch..Price:
£12.50 -
ChamberTite Entry Boot 2 1/2" or 75mm CTB-0250
2 1/2" or 75mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Ch..Price:
£12.50 -
ChamberTite Entry Boot 3" or 90mm CTB-0300
3" or 90mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chambe..Price:
£12.50 -
ChamberTite Entry Boot 4" or 110mm CTB-0400
4" or 110mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chambers a..Price:
£13.75 -
Cable Entry Bulkhead suitable for 4" (110mm) Duct CTB-7450B
4" ChamberTite Cable Entry Bulkhead or Duct Seal suitable for sealing a 100-110mm rigid or flexib..Price:
£25.50 -
Cable Entry Bulkhead suitable for 4" (110mm) Duct CTB-7450BM
4" ChamberTite Cable Entry Bulkhead or Duct Seal suitable for sealing a 100-110mm rigid or flexib..Price:
£25.50 -
-150x150.JPG "Cable Entry Bulkhead suitable for 1 1/2\" (50mm) Duct to Seal up to 8 cable entries CTB-7450B15")
Cable Entry Bulkhead suitable for 1 1/2" (50mm) Duct to Seal up to 8 cable entries CTB-7450B15
4" ChamberTite Duct Seal suitable for sealing a 1 1/2" or 50mm rigid conduit into a wa..Price:
TBA -
-150x150.JPG "Cable Entry Bulkhead suitable for 2\" (63mm) Duct to Seal up to 8 cable entries CTB-7450B2")
Cable Entry Bulkhead suitable for 2" (63mm) Duct to Seal up to 8 cable entries CTB-7450B2
4" ChamberTite Duct Seal suitable for sealing a 2" or 63mm rigid conduit into a watertight ..Price:
TBA -
-150x150.JPG "Cable Entry Bulkhead suitable for 3\" (90mm) Duct to Seal upto 8 cable entries CTB-7450B3")
Cable Entry Bulkhead suitable for 3" (90mm) Duct to Seal upto 8 cable entries CTB-7450B3
4" ChamberTite Duct Seal suitable for sealing a 3" or 90mm rigid conduit into a watert..Price:
TBA -
ChamberTite Entry Boot 5" or 125mm CTB-0500
5" or 125mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chamb..Price:
£22.00 -
ChamberTite Entry Boot 5 1/2" or 140mm CTB-0550 - NEW
51/2" or 140mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Ch..Price:
£22.00 -
ChamberTite Entry Boot 6" or 160mm CTB-0600
6" or 160mm ChamberTite Entry Boot for sealing pipe, cables and ducts into Containment Chamb..Price:
£24.00 -
Cable Entry Bulkhead suitable for 6" (160mm) Duct to Seal upto 9 cable entries CTB-0600B
6" ChamberTite Duct Seal suitable for sealing a 6" or 160mm rigid or flexible conduit ..Price:
TBA -
 - WEB-150x150.jpg "Cable Entry Bulkhead suitable for 7\" (180mm) CTB-0700B")
Cable Entry Bulkhead suitable for 7" (180mm) CTB-0700B
7" ChamberTite Duct Seal suitable for sealing a 7" or 180mm rigid or flexible conduit ..Price:
TBA -
 (600x401)-150x150.jpg "Boot repair gaiter and fixings BRK-6200 2\" or 63mm")
Boot repair gaiter and fixings BRK-6200 2" or 63mm
2" or 63mm Repair boot for Environ entry boot. Consists of gaiter with compression ring with flan..Price:
TBA -
ChamberTite Cable Entry Bulkhead Plate & Glands
4" ChamberTite bulkhead to prevent cross contamination in the event of a breach within the duct o..Price:
TBA -
 redu-150x150.jpg "Duct Bulkhead Fitting - Internal Pipe and Duct Cable Seal 200mm DBF-0200")
Duct Bulkhead Fitting - Internal Pipe and Duct Cable Seal 200mm DBF-0200
200mm Duct Bulkhead Fitting suitable to seal a 200mm internal pipe or duct to prevent vermin, liq..Price:
£20.00 -
 (600x392)-150x150.jpg "Sump Access Repair Boot SAB-7400")
Sump Access Repair Boot SAB-7400
7" Sump Access Boot. Provides access or can be used to seal a opening in a chamber due to ch..Price:
TBA -
 (600x496)-150x150.jpg "Rubber Reducer Boot 3\" (90mm) to 1 1/2\" (50mm) RRB-3015")
Rubber Reducer Boot 3" (90mm) to 1 1/2" (50mm) RRB-3015
3" to 1 1/2" Nitrile Rubber Reduce Boot suitable for inline reduction from 90mm to 50mm. Comes co..Price:
TBA -
-150x150.jpg "Rubber Reducer Boot 4\" (110mm) to 1 1/2\" (50mm) RRB-4015")
Rubber Reducer Boot 4" (110mm) to 1 1/2" (50mm) RRB-4015
4" to 1 1/2" Nitrile Rubber Reduce Boot suitable for inline reduction from 110mm to 50mm. Comes c..Price:
TBA -
-150x150.jpg "Rubber Reducer Boot 4\" (110mm) to 2\" (63mm) RRB-4020")
Rubber Reducer Boot 4" (110mm) to 2" (63mm) RRB-4020
4" to 2" Nitrile Rubber Reduce Boot suitable for inline reduction from 110mm to 63mm. Comes compl..Price:
TBA -
 (600x397)-150x150.jpg "Rubber Reducer Boot 4\" (110mm) to 3\" (90mm) RRB-4030")
Rubber Reducer Boot 4" (110mm) to 3" (90mm) RRB-4030
4" to 3" Nitrile Rubber Reduce Boot suitable for inline reduction from 110mm to 90mm. Comes compl..Price:
TBA -
Bi metal Hole Saw 1 1/2" or 38mm HST-0150
38 mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-071..Price:
TBA -
Bi Metal Holesaw 1 3/4" or 44mm HST-0168
44mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-0716..Price:
TBA -
Bi Metal Holesaw 2 3/8" or 60mm HST-0238
60mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-0716..Price:
TBA -
Bi Metal Holesaw 4 1/4" or 108mm HST-0425
108mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-071..Price:
TBA -
Bi Metal Hole saw 5 1/2" OR 152mm HST-0550
152 mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-07..Price:
£10.00 -
 (600x408)-150x150.jpg "Bi Metal Hole saw 6 7/8\" or 177mm HST-0678")
Bi Metal Hole saw 6 7/8" or 177mm HST-0678
177mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-071..Price:
TBA -
Bi Metal Hole saw 7 7/8" or 200mm HST-0778
200mm Bi Metal hole saw for drilling circular holes in chambers. Use with Hole Saw Arbour HSA-071..Price:
TBA -
-150x150.jpg "Hole Saw Arbour 38 -152mm")
Hole Saw Arbour 38 -152mm
Hole saw arbour and point drill suitable for 38mm to 152mm holesaws ..Price:
TBA -
De-Burring Tool DEB-1000
A quality de-burring tool for removal of sharp edges from plastic products after cutting. ..Price:
TBA
Showing 1 to 37 of 37 (1 Pages)
